HOME / PRODUCTS / Professional Drain Cleaners (Electric) /

Model 88

You Walk While It Works

Manufacturer:

Manufacturer:

SPECIFICATIONS

Diameter:	75 - 250mm
Thickness:	22 - 32mm
Motor:	Electric
Dimensions:	53 x 50 x 78 cm
Weight:	36 kg

This machine is almost as easy to run as a lawn

mower. You push eight or ten foot cable sections

into the line until you reach some resistance.

Then attach the rear cable coupling to the

machine, stand behind it, and turn it on. Watch

the cable feed itself into the line. When a section

has run into the drain, attach another one and

keep going. This self-feeding feature also works

to pull sections out of the line.

The Model 88 handles jobs up to 200 ft. long in

lines from 3" to 10" diameter. A standard 3/4 hp

capacitor motor supplies plenty of power, and

an adjustable safety clutch protects cables and

operator against sudden torque build-ups.

Sections come in two styles: all-purpose

Flexichain, which has a chain center, and the

stiffer Proflex, which has a spring center. A

chain assures easier cable retrieving if the

Flexichain spring should break. The inner

spring in the Proflex gives it greater stiffness,

which is desirable on long or tough jobs. The outer spring is

right-hand wound for faster self-feeding.

Both types of couplings snap together in a second and are taken

apart quickly with a spanner wrench or screw driver. With the

newer "G’’ connector, no tension is on the locking pin when

running in reverse, making it a more durable coupling. Snap on

the 78L-CDC optional adapter, and you can use 6 ft. x 7/8" cables

(6L78) to clear smaller lines.

Sectional Cables

Eight and ten foot "Cable Saver” sections for the Model 88 come

in the all purpose Flexichain which has a chain center,

and a stiffer Proflex which has a spring center. Proflex is also

available with a heavier duty 5/8" spring center.

Automatic Safety Clutch

Protects cable and operator in case

the cable should get caught in the line.

Factory set at 18 – 20 ft. lbs. but can be

adjusted easily for very heavy jobs or

longer runs.

Cable Feeding Tool

It enables cable to get around tight bends and

traps by taking advantage of open-wound design

of cables. Note that operator controls machine by

using power switch in foot pedal mode.

Pneumatic Power Switch

Air-actuated for safety. There is no

electrical connection between switch and

motor. Switch can be removed from handle

and used as a foot pedal when

working with the cable feeding tool.

Folding Handle

Gives Model 88 a low profile for more

convenient storage and transport. Lift

handle, and locking collars slide into

place for secure operation. Handle on

front of frame and rear cross bar make

lifting and loading into car trunk easier.

No Wrench Coupler

G-CDC Cable Drive Coupler is standard on Model 88

units shipped with sections having "G” couplings.

Faster uncoupling at the

machine because large

knurled ring can be

opened instantly

without wrench.

Specifications:

Weight:

80 lbs. (36 kg) without cables.

Dimensions: 21" wide x 16" high with handle folded down. (53 cm x 41 cm)

Motor: 3/4 hp with capacitor and 20 ft. power cord with Ground Fault Circuit Interrupter; rotates 1-1/4" diameter cables at 500 rpm.

Gear Head: Rugged cast iron body, ball bearings, cut gears.

Wheels: 10" rubber rear wheels, 6" solid rubber caster wheel.

Combination Hand or Foot Operated Power Switch: Air activated for safety; no electrical connection between motor and switch; can be used as hand or foot switch. Eleven foot air hose.

Power Switch: Has an "off” position to de-activate the control switch.

Adjustable Safety Clutch: Factory set at 18 - 20 ft. lbs. Protected by a tamper-resistant snap-on cover.

Folding Handle: Reduces truck storage space. Flips down in a second but is completely secure in operating position.

ARE YOU INTERESTED? Υoy can call us at +30 210 882 7770 or alternatively you cancomplete the follwing form: